Fit finder

Will it fit? Check before you order.

Pick the appliance, enter your opening, and see which models fit, closest first. Every result is checked against the manufacturer’s listed sizes, in inches or centimetres.

  1. 1Pick the appliance
  2. 2Enter your opening
  3. 3See what fits, closest first
1 What are you fitting?

2 Measure your space

3 What fits

    Results use the manufacturer’s listed dimensions. Always confirm with the model’s installation guide and a qualified installer before you order. Not sure how to measure? Read the buying guide.

    Before you measure

    How to measure your space

    Four measurements cover most kitchens. Take each one twice.

    1. Width

      Measure the opening cabinet to cabinet at the back, middle and front. Use the smallest number.

    2. Height

      For a range, floor to the top of the counter. For a refrigerator, floor to the cabinet or ceiling above.

    3. Depth

      Back wall to the front of the cabinets. The finder then shows how far each model sits past them.

    4. The way in

      Measure the doorways and halls it has to pass through. The fit check on each product page also checks your doorway.

    Using the fit finder

    Where do the sizes come from?

    From each manufacturer’s listed dimensions and required opening for the model. Always confirm with the model’s installation guide and a qualified installer before you order.

    Can I type fractions or centimetres?

    Yes. Type 35 7/8, 35-7/8 or 35.875, or switch to cm. You can also add the unit after the number, like 91 cm or 910 mm.

    What does “Check the guide” mean?

    The model should fit, but one detail needs a second look in its installation guide, for example the counter height its legs adjust to or a trim kit. Ask us if you are unsure.

    What happens when I save my space?

    Products that fit are marked as you shop, and the space shows in your kitchen plan. It is saved in this browser only, one space for each type of appliance.

    How do I share my measurements with my installer?

    Use “Share with your installer”. The link opens this page with your measurements and the same results.

    Why isn’t every model listed?

    Only models with the manufacturer’s sizes on file are checked. If the one you want is not here, send us your measurements and we will check it for you.

    We are here to help

    Not sure about a measurement? Ask us.

    Send us your numbers and the model you like, and we will check them against its installation guide.

    Contact usStart a live chat